Chain Block 3 Ton 9 Meter Notch Pulley Hoist

Weight Resistance up to: 5Ton 10Ton
Pulley length: 3 meters 6 meters 9 meters 10 meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

Chain Block 3 Ton 9 Meter Notch Pulley Hoist

Weight Resistance up to: 2Ton 3Ton
Pulley length: 3 Meters 6 Meters 9 Meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

1TON

Specifications
Wire Rope Length: 40M
Tensile Strength: 22m/MIN
Power: 4KW 380 VOLT 3 PHASE
Wire Rope Diameter: 8mm

2TON

40M Wire Rope Length
Tensile Strength 18m/MIN
Power 7.5KW
Wire Rope Diameter 12mm

Chain Block 20 Ton 10 Meter Trolley Pulley Hoist SHEN LIEN

Weight Resistance up to: 20Ton 5Ton 3Ton 2Ton
Pulley length: 9 Meters 10 Meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

Chain Block 6 Ton 10 Meter Tackle Pulley Hoist 6 Ton 10 Meter FEI GE

Weight Resistance up to: 6Ton 10Ton 20Ton
Pulley stands for: 10 Meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

Weight Resistance up to: 1Ton
Pulley length: 3 Meters 6 Meters

Weight Resistance up to: 2Ton
Pulley extension: 3 Meters 6 Meters 9 Meters

Weight Resistance up to: 3Ton
Pulley extension: 3 Meters 9 Meters

Weight Resistance up to: 5Ton
Pulley extension: 3 meters 6 meters 8 meters 9 meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

Model G20 Pneumatic Pick G20 pneumatic pick is mainly used to break reinforced concrete, cement, frozen soil, ice sheet and soft minerals, soft rock, road surface during construction.

SPECIFICATIONS:
Full length of the fuselage, : 858mm
heavy body, : 20kg
cylinder diameter, : 40mm
hammer stroke, : 165mm
hammer weight, : 1.1kg
working air pressure, : 0.63Mpa
impact energy, : 60J
impact frequency, : 18Hz
air consumption, : 25L/s
inner diameter of trachea: 19mm

YO18 rock drills are suitable for drilling mainly vertical inclined blast holes under medium hard rock drilling level; they can drill blast holes in various directions at different angles after being equipped with FT-100 air legs. Holes with a diameter of 36~42mm are drilled to a depth of 1.5~2m and a maximum depth of 5m.

Why should you shop at PT. FUTURESTAR INDONESIA?
1. We are FIRST HAND IMPORTERS, so our prices are very competitive.
2. Customers can COME to our store if they want to see the product in person.
3. Serving orders in LARGE / GROWING AMOUNTS

AIR ROCK DRILL PNEUMATIC Y24

Why should you shop at PT. FUTURESTAR INDONESIA?
1. We are FIRST HAND IMPORTERS, so our prices are very competitive.
2. Customers can COME to our store if they want to see the product in person.
3. Serving orders in LARGE / GROWING AMOUNTS

JACKLEG YT28 ROCK DRILL MACHINE
* The YT28 rock drill is operated using wind from a compressor.
* Widely used in mining, railroad, transportation, tunnel and water conservancy construction.
* YT28 drill has the advantages of high efficiency, low noise, light weight, large torque, simple structure and easy maintenance.
* Jackleg drills are most widely used in underground mines. The most frequent use is to create shot holes and holes for inserting rockbolts. A shot hole is a borehole that will then be filled with explosives to open the tunnel. While rockbolt is used to support the roof of the tunnel so that it does not collapse.

G10 PNEUMATIC JACK HAMMER MACHINE
G10 pneumatic pick is mainly used to break reinforced concrete, cement, soil,
rock, road surface, construction.

Specifications
Full length of the fuselage, : 570mm
heavy body, : 10.6kg
cylinder diameter, : 38mm
hammer stroke, : 155mm
Hammer weight, : 0.9kg
Working air pressure: 5 BAR
Impact energy: 39.4J
Impact frequency: 18.5Hz
AIR consumption: 19L/s
Inner diameter of trachea: 19mm

PNEUMATIC BOBOK DRILLING MACHINE G16
G16 pneumatic pick is mainly used to break reinforced concrete, cement, rock,
road surface, construction.

Specifications
Full length of the fuselage, : 600 mm
heavy body, : 12.6kg
cylinder diameter, : 38 mm
hammer stroke, : 159 mm
hammer weight, : 9 kg
working air pressure, : 6 BAR
impact energy: 50J
impact frequency, : 15.5Hz
air consumption, : 25L/s
inner diameter of trachea: 16mm

500KG ELECTRIC CRANE MINI CRANE
* Using a 2,500 watt 220 volt electric dynamo
* Sling Wire Length 28 meters
* Sling Diameter 6mm
* Weight and volume 165 kg (WEIGHT INCLUDED FOR INVOICE SUBMISSION ONLY)

MINI ELECTRIC CRANE / MINI CRANE 1 TON
Capacity: 1 TON
Power: 2.5 KW/380V 3 phase
Sling Length: 30M
Speed: 2800 r/min
Sling diameter: 8mm
Weight: 200 kg (WEIGHT LISTED IS FOR INVOICE SUBMISSION ONLY)
Origin: Import

ROUND PIPE: 19,22,25,32,38,51,63
PIPE BOX: 20,25,30,40,50
BENDING WALL THICKNESS: 0.1- 1.5mm
MAX THICKNESS: 2.5 mm
BENDING RADIUS: 20mm
SPEED: -15mm PORSE, -20mm MOVING PORSE
WEIGHT: 175 kg (Weight listed is for invoice shipping only)
DIMENSIONS: 700 X 500 X 850mm
Dynamo: 380 volts
Power 2.2KW

360 DEGREE 3 INCH ROUND AND SQUARE PIPE ROLL BENDING MACHINE
Solution for those of you who want to bend round and holo pipes to form a semicircle

Power: 2.2 KW
3Phase/380v
Round Pipes: 19, 22, 25, 32, 38, 51, 63, 76mm
Pipe Box: 20, 25, 30, 40, 50, 60mm
Flexural Wall Thickness: 0.5 - 2.5mm
Bending Radius: 20mm
Speed (r/mm): Shaft - 15 Drive Shaft - 20
Weight: 200kg
Dimensions: 700x650x1100mm

MANUAL PIPE BENDING TOOL
THERE ARE 3 SIZES OF 2, 3, AND 4 INCHES

2 INCH PIPE SIZE FROM:
1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2 INCH

3 INCH PIPE SIZE OF:
1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3 INCH

4 INCH PIPE SIZE FROM:
1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 4 INCH

Not compatible for stainless and galvanized pipe types.

PIPE THICKNESS SIZE
1/2″ = 2.75mm
3/4″ = 2.75mm
1″ = 3.25mm
1-1/4″ = 3.25mm
1-1/2″ = 3.5mm
2″ = 3.5mm
2-1/2″ = 3.75mm
3″ = 4mm
4″ = 5mm

ELECTRIC PIPE BENDING TOOLS THERE ARE 3 SIZES OF 2, 3, AND 4 INCH
2 INCH PIPE SIZES FROM: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2 INCH
3 INCH PIPE SIZES FROM: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3 INCH
4 INCH PIPE SIZES FROM: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 4 INCH

PIPE THICKNESS SIZE
1/2″ = 2.75mm
3/4″ = 2.75mm
1″ = 3.25mm
1-1/4″ = 3.25mm
1-1/2″ = 3.5mm
2″ = 3.5mm
2-1/2″ = 3.75mm
3″ = 4mm
4″ = 5mm

* USING A DYNAMO
380 VOLTS 3 PHASE
63Mpa
750W
50Hz
1400r/min
0.8 L/min
2.1A
8L

Specifications
TIPEGF-20
BENDING DIAMETER 4-20MM
WORKING SPEED 25-30R/MIN
POWER 2.2KW/380V 3 P H A S E
ROTATIONAL SPEED 1440R/MIN
WEIGHT: 130kg (WEIGHT LISTED IS FOR INVOICE SUBMISSION ONLY)
For delivery, please contact us first

TIPEGF-25
BENDING DIAMETER4-25MM
WORKING SPEED25-30R/MIN
POWER3KW/380V
ROTATIONAL SPEED1440R/MIN
Weight 185kg (weight listed is for invoice shipping only)

BRAND: JIULONG
Jiulong-Series GF20 bending hoop bending machine is a kind of engineering steel bending equipment, with a new generation, semi-closed type, The machine has a simplified bending process, high work efficiency, convenient use, neat bending, adjustment of bending angle and size, and can bend 4-20mm round steel into various geometric shapes required by construction projects.

For consultation / fast respone service, please contact:
0813-1187-9789

KOWLOON IRON BENDING MACHINE GWH45

This iron bending machine is a special bending equipment designed and manufactured for large-scale construction projects, bridges, tunnels, culverts, power plants, subway projects, etc. This series of products is easy to operate, easy to maintain, efficient and fast, and the arc is accurate.

NOTED: WEIGHT LISTED IS ONLY FOR INVOICE DELIVERY

Specifications
Steel Diamater: 40 - 45mm
Arc radius: 400mm
Bending speed: 20m/min
Power: 4 KW
Rotation speed: 1440r/min
Voltage: 380V (3 Phase)
Dimensions: 1180 x 1000 x 880 mm
Actual Weight: 630kg

Note: Pay attention to the oil before use.

BRAND: JIULONG
This series of steel arc bending machine is a special arc bending equipment designed and manufactured by our company for large-scale construction projects, bridges, tunnels, culverts, power plants, subway projects, etc. This series of products is easy to operate, easy to maintain, efficient and fast, with accurate arc, and one-time molding.

Can bend iron into round shapes...
SPECIFICATIONS:
Technical Parameters
Bending Ability: Carbon, Steel bar diameter 12-32mm
: 18-28mm threaded iron
Operation Disc spec: 150 mm
Bending speed: 20r/min
Motor Power: 4KW
Motor Speed: 1440r/min
Dimensions: 960x 760 x 800 mm
Weight: 350 kg
Volts: 380v

Note: Please pay attention to the oil before use.

BRAND: JIULONG
GW50 type steel bar bending machine this series of products has compact design and structure. Simple operation, safety and reliable performance, a machine for your business development.
It can bend iron in many shapes and variations, like in the video.

* SPECIFICATIONS:
Technical Parameters
Bending Ability: Carbon, Steel bar diameter 6-50mm
Operation Disc spec: 390 mm
Motor Power: 4,000 W 3 PHASE
Motor Speed: 1440r/min
Dimensions: 100x 80 x 75 CM
Weight: 520 kg
Volts: 380v

Note: PAY ATTENTION TO THE OIL BEFORE USE

BRAND: JIULONG (for bending machine products) is TOP SELLING PRODUCT IN CHINA.
GW40 type series steel bar bending machine this series of products has reasonable design and structure Simple operation, safety and reliable performance, this machine is a good machine for your business development.
Can bend iron in many shapes and variations.

Specifications
Technical Parameters
Bending Ability: Carbon, Steel bar diameter 6-40mm, deformed steel (threaded iron) 6 - 32mm.
Operation Disc spec: Ø 350 mm
Motor Power: 3KW
Motor Speed: 1440r/min
Dimensions: 800x 750 x 710 mm
Weight: 350 kg
Volts: 380v

Note: PLEASE PAY ATTENTION TO THE OIL BEFORE USE.
WEIGHT LISTED ON SYSTEM IS FOR INVOICE SUBMISSION ONLY (100gr).
REGARDING DELIVERY PLEASE CONTACT ADMIN

Futurestar 22mm Steel Rebar Cutting Machine/Bar Cutting Machine RC-22 Cutter