Tensile Strength 9m/MIN
Power 22KW
30MM Wire Diameter
Maximum Sling Length 350M
Product Weight 4500KG
Motor
Voltage 380V
Speed 945r/min

3TON

Tensile Strength 15m/MIN
POWER 7.5KW

5TON

Specifications
Wire Rope Length: 150M
Tensile Strength: 10m/MIN
Power: 11KW
Wire Rope Diameter: 15.5mm

Chain Block 3 Ton 9 Meter Notch Pulley Hoist

Weight Resistance up to: 5Ton 10Ton
Pulley length: 3 meters 6 meters 9 meters 10 meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

Chain Block 3 Ton 9 Meter Notch Pulley Hoist

Weight Resistance up to: 2Ton 3Ton
Pulley length: 3 Meters 6 Meters 9 Meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

1TON

Specifications
Wire Rope Length: 40M
Tensile Strength: 22m/MIN
Power: 4KW 380 VOLT 3 PHASE
Wire Rope Diameter: 8mm

2TON

40M Wire Rope Length
Tensile Strength 18m/MIN
Power 7.5KW
Wire Rope Diameter 12mm

Chain Block 20 Ton 10 Meter Trolley Pulley Hoist SHEN LIEN

Weight Resistance up to: 20Ton 5Ton 3Ton 2Ton
Pulley length: 9 Meters 10 Meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

Chain Block 6 Ton 10 Meter Tackle Pulley Hoist 6 Ton 10 Meter FEI GE

Weight Resistance up to: 6Ton 10Ton 20Ton
Pulley stands for: 10 Meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

Weight Resistance up to: 1Ton
Pulley length: 3 Meters 6 Meters

Weight Resistance up to: 2Ton
Pulley extension: 3 Meters 6 Meters 9 Meters

Weight Resistance up to: 3Ton
Pulley extension: 3 Meters 9 Meters

Weight Resistance up to: 5Ton
Pulley extension: 3 meters 6 meters 8 meters 9 meters

- Easy to use and easy to operate
- Easy installation
- Not easily damaged

NOTE: WEIGHT IS STILL APPROXIMATE PLEASE CONTACT US FIRST IF YOU WANT TO ORDER.

Model G20 Pneumatic Pick G20 pneumatic pick is mainly used to break reinforced concrete, cement, frozen soil, ice sheet and soft minerals, soft rock, road surface during construction.

SPECIFICATIONS:
Full length of the fuselage, : 858mm
heavy body, : 20kg
cylinder diameter, : 40mm
hammer stroke, : 165mm
hammer weight, : 1.1kg
working air pressure, : 0.63Mpa
impact energy, : 60J
impact frequency, : 18Hz
air consumption, : 25L/s
inner diameter of trachea: 19mm

YO18 rock drills are suitable for drilling mainly vertical inclined blast holes under medium hard rock drilling level; they can drill blast holes in various directions at different angles after being equipped with FT-100 air legs. Holes with a diameter of 36~42mm are drilled to a depth of 1.5~2m and a maximum depth of 5m.

Why should you shop at PT. FUTURESTAR INDONESIA?
1. We are FIRST HAND IMPORTERS, so our prices are very competitive.
2. Customers can COME to our store if they want to see the product in person.
3. Serving orders in LARGE / GROWING AMOUNTS

AIR ROCK DRILL PNEUMATIC Y24

Why should you shop at PT. FUTURESTAR INDONESIA?
1. We are FIRST HAND IMPORTERS, so our prices are very competitive.
2. Customers can COME to our store if they want to see the product in person.
3. Serving orders in LARGE / GROWING AMOUNTS

JACKLEG YT28 ROCK DRILL MACHINE
* The YT28 rock drill is operated using wind from a compressor.
* Widely used in mining, railroad, transportation, tunnel and water conservancy construction.
* YT28 drill has the advantages of high efficiency, low noise, light weight, large torque, simple structure and easy maintenance.
* Jackleg drills are most widely used in underground mines. The most frequent use is to create shot holes and holes for inserting rockbolts. A shot hole is a borehole that will then be filled with explosives to open the tunnel. While rockbolt is used to support the roof of the tunnel so that it does not collapse.

G10 PNEUMATIC JACK HAMMER MACHINE
G10 pneumatic pick is mainly used to break reinforced concrete, cement, soil,
rock, road surface, construction.

Specifications
Full length of the fuselage, : 570mm
heavy body, : 10.6kg
cylinder diameter, : 38mm
hammer stroke, : 155mm
Hammer weight, : 0.9kg
Working air pressure: 5 BAR
Impact energy: 39.4J
Impact frequency: 18.5Hz
AIR consumption: 19L/s
Inner diameter of trachea: 19mm

PNEUMATIC BOBOK DRILLING MACHINE G16
G16 pneumatic pick is mainly used to break reinforced concrete, cement, rock,
road surface, construction.

Specifications
Full length of the fuselage, : 600 mm
heavy body, : 12.6kg
cylinder diameter, : 38 mm
hammer stroke, : 159 mm
hammer weight, : 9 kg
working air pressure, : 6 BAR
impact energy: 50J
impact frequency, : 15.5Hz
air consumption, : 25L/s
inner diameter of trachea: 16mm